MAG1003
|
Dynamo brush
width 1/4", height 1/2" Lucas 200737 equivalent Can be linished/filed smaller for other applications
|
£5.40 |
MAG1004
|
Pickup brush and spring
length 10.5mm, diameter 4.9mm Lucas 451260 equivalent
|
£1.50 |
MAG1005
|
Earth brush and spring
length 8mm, diameter 5mm Lucas 470537 equivalent
|
£0.80 |
MAG1006
|
Lucas magdyno end cover screw set (4 off screws per set)
|
£2.40 |
MAG1007
|
Lucas magdyno dynamo gear locking tab washer
Lucas 463334 equivalent
|
£0.80 |
MAG1008
|
Lucas screw on type pickup gasket
Lucas 455662 equivalent
|
£0.80 |
MAG1009
|
Lucas magdyno field coil screw
thread data here
|
£1.20 |
MAG1011
|
Lucas screw on type pickup - replica part
Supplied with gasket, pickup brush, brush spring Lucas 458876 equivalent
|
£5.00 |
MAG1012
|
E15 magneto bearing
Lucas 189291 equivalent
|
£4.40 |
MAG1014
|
E15 magneto bearing insulator
|
£1.50 |
MAG1018
|
E18 magneto bearing insulator
|
£1.50 |
MAG1013
|
Lucas clip on type pickup gasket
|
£out of stock |
BE0034
|
Solid state 6V Positive regulator. Replaces MCR2/RB108 Mechanical Cut-out (E3L,E3N type dynamos). Compact design in finned Heat sink. This unit is small enough to conceal inside the original MCR2 cut out box casing. Polarized for positive earth only, and cannot be reversed. Supplied with full wiring instructions including how to change to 2 brush operation.
|
£25.00 |
BE0035
|
Solid state 6V negative regulator. Replaces MCR2/RB108 Mechanical Cut-out (E3L,E3N type dynamos). Compact design in finned Heat sink. This unit is small enough to conceal inside the original MCR2 cut out box casing. Polarized for negative earth only, and cannot be reversed. Supplied with full wiring instructions including how to change to 2 brush operation.
|
£25.00 |