Product Description

Manufactured to our design, machined in house from high specification EN24T  steel, these replace the notoriously fragile standard fork stem on any two speeder model.  Note that substantial work is still required to remove the old stem and braze this in, followed by final finishing.  We can do this work if required for an additional £250.

The 1/4″ cross hole needs aligning to suit before brazing, then the T slot at the top needs cutting in after brazing.

11.5″ total length, 1.25″ for the top half with a 28TPI thread, 1.130″ where it goes into the forks to allow some material for cleanup, and 1″ bore, 4″ deep for the head stem.